weld zone
英 [weld zəʊn]
美 [weld zoʊn]
网络 焊缝区; 焊接区
双语例句
- For this method, the corrected approximation of inherent shear strain is exerted to the fillet weld zone as initial strain of the welded structure and angle distortion is predicted by elastic analysis.
该方法将角焊缝处固有剪切应变分量的修正近似值作为焊接结构的初始应变，施加在有限元模型相应的角焊缝区域，通过线弹性分析预测角焊缝焊接结构的角变形效应。 - The results show that, after welding, microstructure of the weld zone and the heat affected zone are different from the parent metal, showing characteristics of weave structure.
结果表明，焊接后焊缝区和热影响区的组织与母材的组织差别很大，表现为魏氏组织特征； - The ferrite grains were coarsened in the coarse zone of HAZ and weld zone with heat input increasing. The strength and ductility of the welded-joint was changed.
随着焊接热输入的增加，焊接热影响区的粗晶区和焊缝区中铁素体晶粒明显粗化，改变了焊接接头的强度和塑性。 - Crack propagation conducts alternatively between the weld zone and the partially molten zone, and is not strictly to rupture at W/ F boundary surface.
裂纹扩展在焊缝区和半熔化区之间交替进行，并非严格按W／F界面破断。 - Results After stress-corrosion test, there was no discoloration in the weld zone of the laser-welded cast samples.
不进行应力腐蚀试验的激光焊接铸钛试样作为对照组。 - The simulated results show that the stress of weld zone changes from compressive stress to tensile stress during the moving of electron beam.
计算分析表明，随着电子束的移动，焊缝区的应力演变经历了从压应力状态向拉应力状态演变的过程。 - The characteristics of partially melted weld zone and its effects on toughness in medium-carbon HSLA steel
中碳低合金高强度钢焊接半熔化区的特点及其对韧性的影响 - The tensile strength and the elongation percentage of the parent metal and the weld zone increased slightly.
冲击处理使焊缝区和母材区的强度和伸长率均有所增加。 - Numerical Simulation of the Effects of Welding Processes on Temperature Field of GMAW Surfacing Weld Zone
焊接工艺对GMAW堆焊焊缝区温度场影响的数值模拟 - The ultrasonic impacting action at weld toe changes the stress from tensile to compressive. And the stress in weld zone is compressive.
焊趾处的超声冲击作用，焊接纵向残余应力由拉应力转变为压应力，同时带动焊缝区域也处于压应力状态。